• Solar reflective coating on position 2 & 3.

    As we know,soft coated low-E coatings must be made into insulated glass,on glass surface #2 ,or surface #,for laminated insulated glass,the coating will be on surface #4,or #5.The main affected glass performance is the solar coefficient,and U value.Compared with low-E coating on exterior glass, coating on interior surface will have higher solar coefficient,suitable for high altitude areas that require more solar energy. But for solar reflective glass,as there’s no silver layers in the coating,it can be used in both interior…

  • Coating types on Building Glass

    Coating types on Building Glass The original function of glass,is just covering, protect the house from rains,snows,winds,With the development of technology,many kinds of coatings are developed to suite different requirement,such as energy saving,thermal insulation,etc.This article will guide you the coating types and the function of coatings. Energy Saving ,thermal insulation coatings The energy consumed by the air conditioners account most building energy consumption.Single piece glass U value reaches 5.8W/,M2.K,.Modern buildings especially high rise commercial buildings require energy saving glass to…

  • The defects of coated glass and solutions

    The defects of coated glass and solutions Off-line(soft coated) magnetron sputter coated glass can be divided into two categories: solar control glass and low e glass. The defects ratios of them are different. The following describes the defects and solutions for these two categories of products. 1. solar control glass,solar reflective glass, common defects and solutions Solar Control Coated Glass: A coated glass that has a certain control effect on sunlight with a wavelength of 350 to 1800 nm. It…

  • Contact Us


    Sales Email: marketing@cnmorn.com
    Technical support: han@cnmorn.com

    Mobile/Wechat: 0086-17705464660

    QR code
    Hello,welcome to Morn Building Materials.
    × How can I help you?