• FAQ about insulated glass

    1.High SC and low SC,which one is better? Glass with different SC are suitable for different climate areas.Higher SC will decrease the heating costs in winter by allowing more solar energy through the glass,this glass suites for long winter areas.Lower SC value will decrease the solar energy and suits for hot areas,such as middle east,Southeast Asia. 2.What’s the feature of low e glass. a.High infrared reflective. b.Low e value,with low capability of absorbing solar energy. c.Various SC value to match…

  • What’s the difference between double glazing and triple glazing?

    Most glass used in facade is double glazed units, which is made of 1 piece low-E coated glass and 1 piece clear glass,the most common glass combination is 6 low-E+12A+6 clear glass. If the low-E coating is double silver low e coated,glass U value is around 1.6W/m2.k,for triple silver low-E the U value is same but will with lower Solar coefficient.Evne if we change the 2nd glass to double silver low-E,the U value won’t change much. With the development of…

  • Why we use triple silver low-E on your facade?

    Currently single silver low-E cannot meet the architectural energy saving requirement,the new double silver low-E and triple silver low-E ,in addition to the argon filled glass,triple glazing has decreased the glass U value significantly,especially the passive glass,through argon filled triple glazing with two pieces double silver low-E,the glass Uvalue has decreased to 0.6W/m2.k.Triple silver low-E has been more and more popular,then why shall we use triple silver low-e in your facade? The advantages of triple silver low-E: 1.Triple silver LOW-e…

  • How to install capillary tube on glass correctly?

    Capillary tube is used in insulated glass to balance the air pressure inside and outside of insulted glass to avoid glass contract or expand after installation. Sometimes insulated glass production area altitude is quite different from the areas to be installed.If produced in seaside while the installation area latitude is over 1000M high,or produced in high altitude areas while used in seaside.For area pressure reason, glass will expand or shrink after installation,then the capillary is recommended to help keeping glass…

  • some misunderstanding about glass U value

    Misunderstanding 1: Thicker glass has much better U value than thin glass, laminated glass U value is significantly lower than that of the same thickness glass. For clear float glass, the increase of glass thickness does not increase the insulation performance. For example, thick 12mm clear glass and 5mm clear glass,the thickness and glass weight increased by 1.12 times. but its U value only decreased by 7.59%. The hydrogen-filled insulating glass made of 12mm glass and 5mm glass,U value decreased…

  • Factors affect insulated glass performance

    Factors affect insulated glass performance 1. The spacer thickness: mainly by controlling the thickness to avoid the formation of turbulent airflow inside the insulated glass, the cold and hot airflow of the control gas interfere with each other, or control the airflow of the rising and falling air to interfere with each other to control the flow of the heat convection. 2.Gas type and humidity inside insulated glass: The inert gas filled in the interior of the insulated glass can…

  • The advantages of insulated glass in curtain wall

    Superior energy-saving effect: Modern building energy consumption is mainly air conditioning and lighting. The former accounts for 55% of energy consumption, the latter accounts for 23% of energy consumption, and glass is the thinnest and most heat-transferable material in the exterior wall of buildings. Insulated glass creates a air barrier between the extrior and indoor and the temperature insulation performance is excellent. High soundproof performance: Insulated glass can reduce noise by 27-40 decibels, and 80 dB of traffic noise outside…

  • Low e coating position-Surface #2 VS Surface #3

    Most low e coatings for insulated glass are placed on surface #2,but some projects have the low e coating on surface #3,but what’s the difference if we place the coating on #2 and #3? Here we’ll introduce how the low e coating position affect the glass performance. Main difference: 1.Different SC value. Based on above data,SC value changed much based on different position.So clients should adjust the coating position according to the climate and SC requirement.In cold areas,the low e…

  • THE BENEFIT OF DOUBLE GLAZED UNITS FOR CURTAIN WALL

    Top building glass curtain wall is generally with insulated glass(double glazed units), glass is the most thin, easy to heat transfer in building external wall material.double glazed units with aluminum frame of desiccant through the gap above the aluminum frame that makes the air inside the insulated glass stay dry for a long time, with the excellent insulating performance. High sound insulation: double glazed units can decline of 27-40 decibel noise, 80 decibel traffic noise outside the room, then only…

  • Contact Us

    0086-17705464660

    Sales Email: marketing@cnmorn.com
    Technical support: han@cnmorn.com

    Mobile/Wechat: 0086-17705464660

    QR code
    ×
    Hello,welcome to Morn Building Materials.
    × How can I help you?